Sensors and Actuators
CT CLAMP 100A SCT-013
SCT-013 100 A
Non-Invasive AC Current Sensor Split Core Type Clamp Meter Sensor. SCT-013-000 is a Non-Invasive AC current sensor i.e. it is a current transformer which can be used to measure AC current up to 100 amperes.
Current transformers(CTs) are sensors are for measuring alternating current. They are particularly useful for measuring whole building electricity consumption (or generation for that matter). The split core type such as the SCT-013-000 in the picture is particularly suitable for DIY use. Clip this SCT 013 000 straight on to either the live or neutral wire coming into the building without having to do any high voltage electrical work.
This is a current output , you can add a burden resistor to measure voltage across
Package Includes :
1 x 100A AC Current Sensor Module.
Arduino Example
https://learn.openenergymonitor.org/electricity-monitoring/ct-sensors/how-to-build-an-arduino-energy-monitor-measuring-current-only?redirected=true
52mm PP Plastic Water Liquid Level Sensor (FSWITCH52)
Specification:
Float level switch is a simple structure, easy to use level
control device, it does not provide power, no complicated
circuit, it has a mechanical switch than the average small
size, long life and other advantages. As long as the material
used in the correct shape and nature of any liquid or
pressure, temperature can be used, which in the
shipbuilding industry, generating equipment, petrochemical
industry, food industry, water treatment equipment, dyeing
and finishing industry, hydraulic machinery, etc. have been
widely application.
How it works: liquid level sensor magnetic reed switch by
having an important and
integral float, float within the magnetic material in a sealed
non-magnetic metal pipe or plastic pipe set one or more
magnetic reed switch, and then the catheter through a or
more with magnetic float, and double-loop control using a
fixed float and reed
switch in the relevant position, the float rises or falls with
the liquid using the ball close to the beginning of the reed
contacts, resulting in open and shut action for level control
or direction (when the float near the reed switch is turned
on; leave the switch off)
Max Contact Rating :10W
Max Switching Voltage:220V
Max Switching Current:0.5A
Max Breakdown Voltage:220VDC
Max Carry Current:1.0A
Max Contact Resistance:100mohm
Temperature Rating:-10~+60°
Float Ball Material:P.P
Float Body Matertal:P.P
Float level switch is a simple structure, easy to use level
control device, it does not provide power, no complicated
circuit, it has a mechanical switch than the average small
size, long life and other advantages. As long as the material
used in the correct shape and nature of any liquid or
pressure, temperature can be used, which in the
shipbuilding industry, generating equipment, petrochemical
industry, food industry, water treatment equipment, dyeing
and finishing industry, hydraulic machinery, etc. have been
widely application.
How it works: liquid level sensor magnetic reed switch by
having an important and
integral float, float within the magnetic material in a sealed
non-magnetic metal pipe or plastic pipe set one or more
magnetic reed switch, and then the catheter through a or
more with magnetic float, and double-loop control using a
fixed float and reed
switch in the relevant position, the float rises or falls with
the liquid using the ball close to the beginning of the reed
contacts, resulting in open and shut action for level control
or direction (when the float near the reed switch is turned
on; leave the switch off)
Max Contact Rating :10W
Max Switching Voltage:220V
Max Switching Current:0.5A
Max Breakdown Voltage:220VDC
Max Carry Current:1.0A
Max Contact Resistance:100mohm
Temperature Rating:-10~+60°
Float Ball Material:P.P
Float Body Matertal:P.P
Capacitive Proximity SensorNPN LJ12A3-4-ZBX Inductive switch ( LJ12A3-4-ZBX)
Features :
Voltage: DC 6-36V
Output current: 300mA
3 Wire
Polarity: NPN
Detection Distance: 4 mm
Dimention: M12x10x55mm
Ouput Status: Normally Open
Part number: LJ12A3-4-Z/BX
Detection objects: Conductor
Capacitive Proximity Sensor LJC18A3-H-Z/BX NPN 6-36V ( LJC18A3-H-Z/BX NPN)
Specification
- Shape: diameter 18 mm cylinder
- Detection distance: 10 millimeters (mm) Adjustable
- Setting distance: 0-10 (mm)
- Sensing object: metal and non-metal such as plastic, glass, water, oil; detection distance varies with different electrical conductivity of the sample, dielectric constant, water absorption, volume grounded metal for maximum detection distance.
- Operating voltage: 6-36VDC within
- Output: NPN normally open three-wire
- Output Current: 300 milliamperes (mA)
- Output current: three-wire less than 0.8V
1 Chanel Relay Board 5V (RELAY 5V - NC NO 250V 10A )
1 CH DC 5V Relay Module without Optocoupler isolation 5V Level Trigger
2 Channels Relay Board 5V ( Copy ) (RELAY 2CH)
2 CH DC 5V Relay Module with Optocoupler isolation Low Level Trigger
4 Channels Relay Board 5V (RELAY 4CH)
4 CH DC 5V Relay Module with Optocoupler isolation Low Level Trigger
AD8232 ECG Measurement Pulse Heart Sensor (AD8232 ECG Measurement Pulse Heart)
Specification:
1.AD8232 adopts double poles high-pass filter to eliminate the motion artifacts and electrode half cell potential
2.AD8232 adopts an operational amplifier that is without using constraint to build a three pole low pass filter, eliminating extra noises
- Rated temp range : 0----70degree
- Working temp range: -40-----85degree
1.AD8232 adopts double poles high-pass filter to eliminate the motion artifacts and electrode half cell potential
2.AD8232 adopts an operational amplifier that is without using constraint to build a three pole low pass filter, eliminating extra noises
- Rated temp range : 0----70degree
- Working temp range: -40-----85degree
AHT10 Temperature and Humidity Sensor
1. Module size: 16*11mm
2. The port type: I2C
3. Working voltage: 1.8 - 6.0V
4. Interface size: 4*2.54mm spacing
5. The humidity precision: typical ± 2%
6. Humidity resolution: 0.024%
7. Temperature accuracy: typical ± 0.3 °c
8. Temperature resolution: typical 0.01 °c
9. The operating temperature: -40 ℃-85 ℃
2. The port type: I2C
3. Working voltage: 1.8 - 6.0V
4. Interface size: 4*2.54mm spacing
5. The humidity precision: typical ± 2%
6. Humidity resolution: 0.024%
7. Temperature accuracy: typical ± 0.3 °c
8. Temperature resolution: typical 0.01 °c
9. The operating temperature: -40 ℃-85 ℃
INMP441 I2S Microphone MEMS I2S
INMP441 Omnidirectional Microphone Module MEMS I2S Interface Supports ESP32
INMP441 Omnidirectional Microphone Module MEMS I2S Interface Supports ESP32
INMP441 is a high performance, low power consumption, digital output, omnidirectional MEMS microphone with bottom port. The
The complete INMP441 solution consists of a MEMS sensor, signal composition conditioning, analog-to-digital converter, anti-aliasing filter, power management and industry standard 24-bit I2S interface. The I2S interface allows INMP441 to connect directly to digital processors, such as DSPs and microcontrollers, without the need for the audio codec used in the system. INMP441 has a high signal-to-noise ratio and is an excellent choice for near-field applications. INMP441 has a flat broadband frequency response, resulting in high definition of natural sound.
Product Features:
1. Digital I2S interface with high-precision 24-bit data
2. High signal-to-noise ratio of 61 dBA
3. High sensitivity -26 dBFS
4. Stable frequency response from 60 Hz to 15 kHz
5. Low power consumption: low current consumption of 1.4 mA
6. High PSR: -75 dBFS
GY-68 BMP180 Atmospheric Pressure Sensor (GY-68 BMP180)
1.8V to 3.6V Supply Voltage
Low power consumption - 0.5uA at 1Hz
I2C interface
Max I2C Speed: 3.5Mhz
Very low noise - up to 0.02hPa (17cm)
Full calibrated
Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Low power consumption - 0.5uA at 1Hz
I2C interface
Max I2C Speed: 3.5Mhz
Very low noise - up to 0.02hPa (17cm)
Full calibrated
Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Clutch Gear Servo Motor Sunfounder
http://wiki.sunfounder.cc/index.php?title=SF006C_Clutch_Gear_Digital_Servo
MPU6500 Accelerometer Gyro Sensor (MPU6500 GY-6500)
Specification:
Module model: GY-6500
Using the chip: MPU-6500
Power supply: 3-5v (internal low dropout voltage regulation)
Communication method: standard IIC/SPI communication protocol
Chip built-in 16bit AD converter, 16-bit data output
Gyro range: ±250 500 1000 2000 °/s
Acceleration range: ±2±4±8±16g
Adopting Shenjin PCB, the machine welding process guarantees the quality
Pin pitch 2.54mm
Module size 15mm*25mm
Module model: GY-6500
Using the chip: MPU-6500
Power supply: 3-5v (internal low dropout voltage regulation)
Communication method: standard IIC/SPI communication protocol
Chip built-in 16bit AD converter, 16-bit data output
Gyro range: ±250 500 1000 2000 °/s
Acceleration range: ±2±4±8±16g
Adopting Shenjin PCB, the machine welding process guarantees the quality
Pin pitch 2.54mm
Module size 15mm*25mm
GY-291 ADXL345 Accelerometer Digital gravity sensor (Adxl345)
Adxl345 digital three-axis acceleration of gravity tilt module Ar code iic / spi
Name: three-axis acceleration of gravity module
Chip: the adxl345
Power supply: 3-5V
Communication: the IIC / SPI communication protocol
Measuring range: ± 2g ± 16g
Schematics, manuals and reference documentation of relevant data
51, the avr, the Ar microcontroller test code
3-axis, ± 2g / ± 4g / ± 8g / ± 16g
Name: three-axis acceleration of gravity module
Chip: the adxl345
Power supply: 3-5V
Communication: the IIC / SPI communication protocol
Measuring range: ± 2g ± 16g
Schematics, manuals and reference documentation of relevant data
51, the avr, the Ar microcontroller test code
3-axis, ± 2g / ± 4g / ± 8g / ± 16g
Servo Motor Metal gear LKY-62 (LKY62)
- MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The shell is more accurate and smooth, the speed is much faster
- Gear Micro Servo Motor For robot Plane Helicopter Boat Car Horns servo Remote controlled aircraft for DIY
- Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS
- Fit for ALL kind of R/C Toys and also make electronics diy based on for ArduinoIDE , Raspberry Pi, etc
- Suitable for ordinary small electric aircraft models and is not recommended in large fixed wing and electric helicopter
| Product Dimensions | 5.8 x 0.7 x 3.5 inches (14.7 x 1.8 x 8.9 cm) |
| Item Weight | 1.5 pounds (0.68 kg) |
| ASIN | B01MTW06IU |
| Item model number | LKY66 |
| Manufacturer recommended age | 8 years and up |
| Brand | Longruner |
| Model Name | LKY62 |
| Voltage | 6 Volts |
| Item Dimensions LxWxH | 5.8 x 0.7 x 3.5 inches (14.7 x 1.8 x 8.9 cm) |
| Material | Metal |
FTDI (FTDI)
Product Description
FT232RL FTDI USB To TTL Serial Converter Adapter Module For
Feature:
Chip: FT232RL
Draw out all signal port of FT232RL chip
RXD / TXD transceiver communication indicator
USB power supply, can choose 5V or 3.3V, set by jumper
With over current protection, using 500mA self-restore fuse
Pin definition: DTR, RXD, TX, VCC, CTS, GND
Pitch: 2.54mm
Size: 36 x 18mm (L x W)
Interface: Mini USB (Cable not Included)
Capacitive Analog Soil Moisture Sensor 3.3~5.5V (CSMS V1.2)
Features
Supports Gravity 3-Pin interface
Analog output
Applications
Garden plants
Moisture detection
Intelligent agriculture
Garden plants
Moisture detection
Intelligent agriculture
Features
Supports Gravity 3-Pin interface
Analog output
Specification
Output Voltage: 0 ~ 3.0VDC
Operating Voltage: 3.3 ~ 5.5 VDC
Interface: PH2.0-3P
Dimension: 98mm * 23mm (3.86in x 0.905in)
Output Voltage: 0 ~ 3.0VDC
Operating Voltage: 3.3 ~ 5.5 VDC
Interface: PH2.0-3P
Dimension: 98mm * 23mm (3.86in x 0.905in)
Liquid Flow Sensor OD 20mm (FS 20mm)
FS 300A Liquid Flow Sensor Outer Diameter =20mm Max 1 -160 Lt/min
8 Channels Relay Board 5V (RELAY 4CH)
8 CH DC 5V Relay Module with Optocoupler isolation Low Level Trigger