FDM Printers
- Build Size 220x220x270 -- Print speed max(150mm/s), Recommended (60-100 mm/s)
- Dual-Gear Direct Drive Extruder: Compatible with more filaments, Ender 3 S1 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.
- CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed.
- Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet.
- Higher Printing Precision & Easy to Install: With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. And 96% of the printer body is pre-installed, making assembling extremely convenient with only 6 steps and the maintenance of the printer is simple and easy.
- Power Loss Recovery and Filament Sensor: Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents.
Build Size 300x300x400 mm
Intelligent Auto-leveling: The CR 10 Smart is equipped with the V2.0 upgraded auto leveling system. After your first automatic leveling, you can start printing immediately, no more manual tedious leveling work.
Ultra-silent Design: Self-developed 32bit silent motherboard, low-noise power supply, and highly efficient cooling fans ensure a silent 3D printing experience.
Built-in WIFI Function: Creality CR10 Smart supports both WIFI & RJ45 wired network connection. With the Creality Cloud APP, you can easily slice 3D models, remote control your printers, and print an object whenever and wherever you are with your phone.
Screen Protection & Auto-shutdown: Creality CR 10 Smart will auto shutdown after the model is completed to save power and effort. And it also supports auto feeding and retreating filament which makes the process easier.
Dual Z Axes+Dual Diagonal Drawbars: This Creality 3d printer adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and makes the creality CR-10 Smart 3d printer more likely to print out with high accuracy prints.
| Print technology: | FDM | Supported material: | PLA/ABS/TPU/PETG |
| Printing size: | 300 × 300 × 400 mm | Filament diameter: | - - |
| Product size: | 578 × 522 × 648 mm | Extrusion method: | Remote extrusion |
| Package size: | 660 × 575 × 290mm | Hotbed temperature: | ≤ 100 degrees C |
| Product net weight: | 14 kg | Nozzle temperature: | ≤ 260 degrees C |
| Package gross weight: | 17.3 kg | Printing layer thickness: | 0.1mm - 0.4mm |
| Printing precision: | +/-0.1 mm | Print platform: | Carborundum glass |
| Nozzle diameter: | 0.4 mm | Max power consumption: | 350W |
| Nozzle quantity: | 1 piece | - - | - - |
| Power requirement: | 110 - 240V DC 24V | - - | - - |
| Slicing software: | Creality/Cura | - - | - - |
| Print mode: | SD card / WiFi | - - | - - |
| Supported languages: | 9 languages (Chinese, English, Spanish, German, French, Russian, Portuguese, Italian, Turkish) | - - | - - |
Specifications
Creality K1C 3D Printer Fiber 3D Printer
The Creality K1C is an upgraded version of the previous K1, boasting an impressive max print speed of up to 600mm/s and extra capabilities like an AI camera and quick swap nozzle. With its sleek design and sturdy chamber, the K1C offers a reliable and stable printing experience with unparalleled precision and accuracy. With a build volume of 220x220x250mm, the K1C enables the creation of bigger and more intricate models. Its high-precision nozzle ensures precise and detailed prints.
K1C can make use of Carbon Fiber filaments, which are widely used in industrial printing for their mechanical strength and resistance to wear, deformation, and aging.
Similar to the K1, the K1C sports an easy-to-use touchscreen interface, making it simple for users to navigate through various operations. Additionally, with an acceleration of 20,000mm/s², the Creality K1 runs up to 600mm/s in just 0.03 seconds, making it print up to 12 times faster than other FDM printers on the market. The high-quality titanium alloy hot end allows you to easily print up to 300°C. In combination with the metal direct drive extruder, which has an extrusion force of 50N, you can use PLA, ABS, PETG, TPU, PA, and PC, among others, on the K1C. Effortlessly switch to a hardened stainless steel nozzle to print abrasive filaments, such as PA-CF, without any problems.
The K1C also comes equipped with a filament run-out detection system, which automatically pauses the printing process when the filament runs out, preventing any potential errors or wasted prints. Furthermore, its resume printing function allows users to continue printing from where they left off in case of power outages or interruptions.
Overall, the Creality K1C is an excellent choice for both beginners and enthusiasts alike. Its user-friendly interface and reliable performance make it a reliable and efficient 3D printer for various printing needs.
Main specification of Creality K1C 3D Printer
- Suitable for Carbon Fiber 3D Printing
- metal Extxtruder, Enhanced Reliability
- Auto to Calibration for Hands-free Leveling
- Tri-metal “Unicorn” Nozzle, Quick to Swap
- Observant AI Camera
- Carbon Fiber Reinforced Filaments Well Supported
- Dynamic Balancing for Reduced Vibration
- CoreXY, Proven to Be Super Fast
- Air Filter & Silent Mode
- Creality OS & Superb Software Ecosystem
Creality3D K1 Max High Speed 3D Printer
SUPER FAST 3D PRINTING
Experience lightning-fast 3D printing with the Creality3D K1 Max High Speed 3D Printer. Achieve 600mm/s speed, enjoy hands-free auto-leveling, and produce quality print results with enhanced cooling.
Key Features of the Creality3D K1 3D Printer:
- 300mm x 300mm x 300mm Build Volume
- Compatible Printing Materials Up to 300°C
- Quality of Life Features Like Hands-Free Auto Bed Leveling
- High-Speed CoreXY with 20000 mm/s² Acceleration
- Sturdy Unibody Die-cast Frame
- Assembled & Calibrated Out of the Box
- WiFi
- Material Types PLA, ABS, PETG, PET, TPU, PA, ABS, ASA, PC,
PLA-CF*, PA-CF*, PET-CF* - Filament runout sensor
- Built-in lighting
- Hands-free auto-leveling
- Printer self-testing with a single tap
- Easy print removal with magnetic bed
- Remotely control and monitor via PC or phone
Creality Ender 3 V3 (Free Starter Filament Spool)
Creality Ender 3V3, a 3D printer with CoreXZ kinematics, is designed for both beginners and experienced users. With a build volume of 220 x 220 x 250mm, the 3D printer allows you to create a wide range of projects with ease. The V3 version features upgraded components such as a new silent motherboard, improved hotend, quick-swap nozzle and a sturdy frame for enhanced stability. It also comes with a resume printing function in case of power outages, making it a reliable option for long prints. The Ender-3 V3 supports various filaments including PLA, ABS, TPU, and more, giving you the flexibility to experiment with different materials. Easy to assemble and use, this printer is a great choice for anyone looking to dive into the world of 3D printing.
- 600mm/s Max Printing Speed
- Auto-Leveling
- 0.2mm Printing Accuracy
- Dual-Gear Direct Extruder
- Input Shaping
- 4.3in Color Touch Screen
- WiFi Connection
- 220x220x250mm
CoreXZ for 600mm/s Fast Speed
It can print 12 times faster than a regular i3-style 3D printer, a new benchmark for bed slingers. The motion system is much lighter and faster with the X and Z motors attached to the base. X and Z-axis are rigged together as one, allowing two high-torque motors to work in unison for quick response. And, Ender-3 V3 prints faster and better with Creality Hyper PLA filaments.
Top-notch Direct Drive Extruder
The direct extruder kit is enhanced by a bolster spring and a ball plunger for more than 1000h clog-free extrusion. The nozzle and heatbreak are unified as one to block heat creep and ensure easy swap. Meanwhile, the nozzle is tipped with hardened steel to confidently handle carbon high-strength engineering filaments. Also, a 60W ceramic heater encircles the hotend, able to fully melt ABS, PETG, PLA-CF, and other high-temp filaments on the fly.
Gear Up for Print Quality
The Z-axis adopts precision linear shafts and timing belts. No more layer shifts arising from bent or misaligned lead screws. Two model cooling fans are mounted on the printhead, front and back. Their strong and even wind boosts cooling during printing, hence better printing quality. The front part cooling fan and the hotend cooling fan are dynamically balanced. So they are less likely to wobble, minimizing ringing or ghosting. The printer also uses a G-sensor to measure and reduce vibration resonance.
Open Source & Color Touch Screen
The printer is incredibly steady and durable, as the gantry and base are made of aerospace aluminum alloy by integrated die-casting. It displays the leveling process, model preview, and temperature vividly with motion graphics. Creality OS enables many advanced functions such as linear advance and input shaping. You can customize it or join the open-source community to explore more. The printer also offers an 8G ROM for file storage and a 4.3" color touch screen for vivid display and intuitive control.
Auto Leveling & Input Shaping
It is easy to assemble in three steps. When you need to calibrate, the self-check function completes the auto leveling, input shaping, and more with a single tap. Creality Print includes rich presets for quick model slicing. Besides a wealth of free models, Creality Cloud supports cloud printing and remote monitoring, helping you keep an eye on printing wherever you are.
- 1