Spare Parts
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
The improvements compared to the other temperature resistance in the market.
Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3 mm, length 15 mm, can be used with the heating block that support the thermocouple.
The temperature measurement range is increased from -50 ℃ - 250℃ to -50 ℃ - 320 ℃. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
100K ohm temperature sensor
Female pin head
High temperature insulated wire. Made of high-quality material, not easy to break and long durability.
Specifications: Resistance: at 25C=100K ohm
Cable Length: Approx. 70 cm
Brass nut 0.2mm pitch M8 Lead screw
Color: silver
Size: 20*20*17mm
The board has heater and fan MOSFET outputs and 3 thermistor interfaces.
The LED will light when the heater has output.
Heated bed has additional 11A fuses.
Two Z motor outputs available incase you want to connect..
Jumper included to configure the steps of your driver board
CR10 Aluminum Upgrade Dual Gear mk8 Extruder Kit for CR-10/CR-10S PRO RepRap Prusa i3 1.75mm 3d parts Drive Feed Extruder
Item type: CR10S PRO Extruder
Suitable: For CR-10, For CR-10S, For Ender-3, For Ender-3 PRO.
Advantage:
1. Double gear extrusion mechanism, high extrusion force, ensuring smooth feeding
2. The original aluminum alloy driver is supplied with CR-10S PRO. It can also be installed in Ender-3, Tornado... stable and durable.
3. All-metal aluminum alloy, diy aluminum block, need to be assembled by itself
Product use: Extruder
Product thread: M6 thread
Material: Brass
Price for 1 Unit
● Heating block：16*16*12mm.
● Cooling fan：30*30*10mm
3D Printer MK8 Brass Nozzle
Available size 0.2, 0.3, 0.4, 0.5, 0.6, 0.8
For 1.75mm filament diameter Produce consistent prints with smooth and glossy polish
The 3D printer nozzle is made of high quality brass material :
Resistant to rust and corrosion
Sturdy and durable
Easy to install
After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts
3D Printer MK10 Stainless Steel Nozzle
Thread 6.8 mm (PTFE tube not included)
3D Printer MK10 Stainless Steel Nozzle
Thread 6.8 mm (PTFE tube not included)